Click picture to see larger one
(Please wait while loading...large page)


Here's my car: Build date June 1965

	Here are pix of the lower arms on my 65 Chevelle. These arms only have 2 holes, one at each end on the top.You can see that the pass side is dented on the lower edge. Also these seem to be fairly deeply pitted. If I don't have enough pictures let me know. The build date of this car is June 1965 if that helps to get the correct type. I also included a picture of the upper arms at the 12 bolt housing. Only one has a reinforcement spot welded on. Were both sides supposed to have it?

1965 Chevrolet Chevelle

Here are pix of the lower arms on my 65 Chevelle. These arms only have 2 holes, one at each end on the top.You can see that the pass side is dented on the lower edge. Also these seem to be fairly deeply pitted. If I don't have enough pictures let me know. The build date of this car is June 1965 if that helps to get the correct type.

I also included a picture of the upper arms at the 12 bolt housing. Only one has a reinforcement spot welded on. Were both sides supposed to have it?

Thanks John

Prices

Glenn Lever
EST 8 to 5
585 342 3261

CanAm
Member #190

Team Chevelle
Member # 2795

American Chevelle Enthusiasts Society
Member # 6615